Supplies NeededNatural Fiber Twisted Sisal Strand Rope
Mini Hot Melt Glue Gun
Glue sticks Scissors
Step by Step Instructions1. Start your coil. Place some hot glue right on the end of your rope, then fold the rope as tight as possible against the other rope to form a small circle. Hold for a few minutes until dry. TIP: Be careful, hot glue can burn! Make sure your hold the outer edge of the rope. 2. Once the center point is secure, add a little hot glue to the outside of the sisal and continue your coil. Hold until dry. TIP: Make sure the glue is dry every time, otherwise the placemat could uncoil. 3. Continue this process until you reach the size desired. Standard charger size is 13 inches but feel free to hold your plate up to the placemat to determine what works best for you. 4. Make sure that you end where you start so that it's even on all sides. 5. Once you're at the size that works best for you, take your scissors and cut the rope. 6. Just use a little hot glue to secure the end, and you're finished!
I can't tell you how often I use these placemats, they just go perfectly with anything I choose to place on my table. And honestly, I've got a few messy eaters in the house. No problem! I make a few more to stock up. Don't hesitate, make yourself some fabulous placemats today!